Golden Tips on Resurfacing and Repaving Asphalt Driveways

The decision of whether to resurface or repave a driveway in Melbourne should be made only after consulting with an asphalt paving contractor. Oftentimes, one can benefit a lot by getting their opinions and even estimates for free. It is also vital to know what aspects exactly to consider with such a professional.

Asphalt

Shortcomings of Maintenance

Driveways made using the material do not remain black and smooth indefinitely, but sealing and protecting them offers some measure of protection. However, they oftentimes end up being corroded by various factors over time. These include water-penetration, ultraviolet rays and other forms of heat as well as substances like salt, gas, oil and grease. A driveway may be worn-out, corroded or even have cracks, all of which may require resurfacing work if the condition proves severe enough. An asphalt Melbourne specialist can perform hot-mix resurfacing on top of the entire driveway. As a general rule, this measure is only cost-efficient if more than 25 percent of the surface requires repairs.

Pavements made of Asphalt are hard and brittle, which leads to development of cracks over time. They range from hairline to inch-wide or more and can be the greatest enemy of any driveway. Cycles of freeze-thaw action can prove to be quite destructive in the colder climates and can cause major damage on the driveway if water percolates the cracks and expands while turning to ice. Penetration of water can lead to serious damage to the pavements even in the warmer climates. In general, the larger the crack formed, the more serious is the problem created and the sooner it requires being fixed. Cracks left un-repaired can occasion serious deterioration of a pavement, even affecting its base layers. This kind of wear and tear requires replacement of the driveway in total especially in the colder climatic conditions.

Deciding Between Fixing and Getting a New Driveway

A worn-out driveway can be dealt with by taking different measures, all of which depend largely upon condition of the foundation or base layers. These include resurfacing, doing patchwork and filling of cracks or even ripping out the existing driveway altogether and installing a new one. Take note however that the surface is beyond repair if cracks cover at least three-quarter of the driveway. The problems may originate from lower down, in which case the situation might warrant its complete overhaul by residential asphalt services.

A problem with the foundation would be the most likely problem if the driveway has undergone resurfacing several times over using hot mix asphalt but keeps deteriorating prematurely. Consider installing an entirely-new driveway in such cases. Areas that have mounds or depressions should likewise be constructed entirely from the base. Putting up a new driveway is a sensible undertaking for a person with several areas of this nature.

Different Factors Causing Premature Wear

An asphalt driveway installed properly by the residential asphalt services Melbourne offers, can last for between 15 and 25 years if kept well. Extra-heavy loads, extreme conditions of weather and shortcuts taken during the construction process can all lead to its premature deterioration and failure.

Ensure first checking out the background of any specialized contractor you plan to engage. Ask for references to help you establish the quality-level of their work too. Remember scrutinizing aspects relating to attention to details and on-time completion of work.

Leave a Reply

Your email address will not be published. Required fields are marked *